How to copy your old CAME remote onto a TOP-432EE

For: Any CAME receiver that already works with your old CAME fixed-code remote

Before you start

• You need your old, working CAME remote and the new TOP-432EE. Below, A is your old (saved) remote and B is the new one.
• The new remote takes one 3 V CR2032 battery.

Copy the code

1. On the new remote (B), press and hold buttons 1 and 2 together for 5 seconds. The LED changes to show it is ready.
2. Press button 1 or 2 on B once. The LED lights steadily.
3. Hold B against your old remote (A), back to back, and press button 1 or 2 on A. The LED on B flashes 3 times: the code is copied.

• After that, B works your receiver the way A did.

Good to know

• The TOP-432EE can send in 12-bit or 24-bit mode, and the mode has to match your receiver. If you’re not sure, email us your receiver’s model.

Not covered on this page

This page covers copying from a remote that already works. Adding a remote to a receiver when you have no working remote depends on your receiver or control board, so email us your motor model.

Remotes this guide is for

• CAME TOP-432EE

Where these steps come from

Our own wording of the manufacturer's instructions. If your opener's manual says something different, follow the manual.

• CAME leaflet FA01816M24 (in the TOP-432EE pack)

Still stuck? Email info.whichremote@gmail.com with your motor model and we’ll walk you through it.